Tips for performing maintenance on a Liebherr excavator
Would you like to perform periodic maintenance on your Liebherr yourself? In this blog, we provide some useful tips for the most common maintenance tasks. Need help? Our specialists are ready to assist you!
Replace oil pan filter
Crankcase vapors are formed because diesel vapor escapes past the piston rings during the power stroke of a combustion engine. These vapors end up under the crankcase. The filter purifies these vapors.
The crankcase filter must be replaced according to specific maintenance intervals. Check the manual to see which interval is recommended for your machine. Or ask our specialists.
Replacing air filters
Air filters ensure that clean air is drawn into the engine. Replace them in a timely manner. This benefits the lifespan of the turbo.
Change swing gearbox oil
There is only one type of oil suitable for a slewing gearbox in a Liebherr. That is oil of the LS90 type. Always make sure to use this oil when changing it. Are you unsure? Then contact one of our specialists.
Adjusting valves
Do you want to adjust the valves yourself? Do this after every 2,000 operating hours. We supply a complete kit for adjusting valves so you can get started yourself. Of course, we can also take care of this job for you completely.
No time? Have maintenance carried out by our specialists
Don’t have the time or personnel to perform maintenance on your machine? Grovema offers maintenance packages to keep your machine in top condition. Check the overview below to see which package your machine needs.
500 operating hours
- Replace hydraulic filter
- Change engine oil
- Replace fuel filter
- Change oil in final drives of wheeled and crawler excavators
1,000 operating hours
- Replace hydraulic filter
- Replace inner air filter
- Replace outer air filter
- Replace fuel filter
- Change engine oil
- Change gearbox oil of wheeled crawler excavators
- Adjust valve cover
- Change axle oil of wheeled excavators
- Change swing gearbox oil
- Change oil in final drives of wheeled and crawler excavators
1,500 operating hours
- Change engine oil
- Replace fuel filter
- Change oil in final drives of wheeled and crawler excavators
2,000 operating hours
- Replace hydraulic filter
- Replace inner air filter
- Replace outer air filter
- Replace fuel filter
- Change engine oil
- Change gearbox oil of wheeled crawler excavators
- Adjust valve cover
- Replace multi-belt
- Change axle oil of wheeled excavators
- Change swing gearbox oil
- Change oil in final drives of wheeled and crawler excavators
Send an email to info@grovema.com for a quotation. Our specialists are happy to assist you!
