Liebherr parts, reliable, used and immediately available
An important component of a mobile excavator or crawler crane is the final drive. That’s why in this blog we explain how a Liebherr final drive works and what you need to know if it needs to be replaced. A final drive is found on a wheel loader, mobile excavator, crawler excavator, and a bulldozer.
The operation of a final drive
A final drive transfers the power from the travel motor to the wheels or the tracks. Internally, a final drive consists of various gears that increase the power from the travel motor.
Wear of a Liebherr final drive
Over time, a final drive wears out. When the gears are worn, play develops between the gears. In the ideal situation, everything should fit together seamlessly. Wear is clearly noticeable if you can move the bearings and gears back and forth by hand.
Replacing a single part is not advisable
Our advice is to replace the entire final drive when there is wear. If only one part is replaced, it will wear out quickly. This is because the new part will quickly start to wear as the older parts are already somewhat worn.
Replace in time
A Liebherr final drive wears down with normal use. The longer this continues, the faster significant movement can cause the gears to wear. To prevent downtime, it is important to replace the final drive in time.
Reliable parts in the webshop
Every final drive that arrives at Grovema is disassembled. We check each part for wear. This way, you are assured of a properly functioning final drive when you purchase it through our webshop.
Final drive for mobile excavators and for crawler cranes
Are you looking for a final drive for a mobile excavator or wheel loader? Then check the ‘axle’ category. Or go directly to the correct category.
Are you looking for a final drive for a crawler excavator or bulldozer? Then check the ‘final drive’ category. Or go directly to the correct category.
Frequently searched Liebherr final drives
FAT450/044
Among others used in the Liebherr R954 / R954B
FAT350P022
Among others used in the Liebherr R902 / R904 / R912
FAT500D585
Among others used in the Liebherr LR632 / LR632 B / PR732 B / PR732
FAT500/035
Among others used in the Liebherr R954 / R964 / R964B / R954B / R954C / R964C
FAT400P073
Among others used in the Liebherr R934 / R944 / R942 LI / R932 Li / R934B / R944B
